Several weeks ago Brandi repainted her bathroom. When we were searching online for new towel racks these shelves caught her eye.

• 

• 

I offered to make a version of those and we had the idea to do a whitewash to match some of the other new decor around the house. We both thought the white would look really good with the deep blue color she had painted. On a shopping trip at Menards we saw this toiler paper holder, which I said could be sanded down and whitewashed to go with the shelves.

Since it was a smaller piece it would be a good test for the whitewashing techniques. I helped her out, but Brandi did most of the work and we both liked the result, especially for our first attempt. It was done by scuffing up the wood with a wire brush and then applying thinned out paint with a small chip brush. We took it back to her house and hung it up.

In the mean time, I had started on the shelves. Since we were going for a weathered whitewash look, I milled some reclaimed lumber to 1″ thick, cut everything to size, did a rough sanding, glued, and screwed.

• 

• 

Some of the pieces had cool characteristics to them that would look good with the whitewash. I did some testing of paint and stain to roughly apply to the wood before whitewashing. I wanted to be able to create more of a dirty/weathered look than what we ended up with for the toilet paper holder.

Going in, I thought a gray or one of the blackish stains would be the winner. We both preferred this dark walnut.

Next, we tested with a different whitewash technique, which involved pouring thinned out paint on the wood and spreading it with a scraper. The results looked really cool.

You can see the scraper at the top of the picture below. I gave the shelves a quick coat stain, since it was going to be painted over.

When Brandi saw the stained shelves in person, she loved how the grain and imperfections of the wood were highlighted, thinking it would be a nice contrast to have some wood grain in the bathroom. So she redid the toilet paper holder and we gave it two coats of spray lacquer.

We also finished the shelves with two coats of spray lacquer. Since the plan was a weathered and whitewashed look I had only done a sanding with 40 grit and you could feel the roughness of the wood. So I did 6 coats of a wipe-on poly as well, which gave things a much better feel. Then I attached the hooks for towels and we hung them up.

• 

• 

• 

• 

Notice the mini crate I posted about the other day? Not sure what she’s going to fill it with. The stained look was definitely the right decision and looks great with the towels and decorations.