I’ve had a bunch of pegboards in my shop for over five years, and I’ve figured out what works and what doesn’t. I love that a lot of my tools are in direct view and can quickly be accessed. I didn’t love a few areas that I go to frequently though. The first wall I wanted to tackle looked like this.
The main problem was the hammers. They’d become crowded and it was a pain to pull one out when it was second or third in line. I moved all of the other tools up on the wall and lined up my hammers on the assembly table.
After taking measurements, I cut up oak pieces from my old kitchen light box. This storage shelf came together pretty quick and has room for even more hammers. Now I can quickly grab any hammer without disturbing the others.
Here’s the updated wall.
The next wall to the right was making poor use of space, especially since I don’t grab some of the saws very often. Take a look and see they were nearly occupying half of the wall. The files never worked well on those individual hooks either, which always pulled out of the wall.
By moving stuff around I was able to get several more saws, like my Japanese pull and coping, as well as other tools up on the wall.
Over to the right again was tools used primarily for measuring and alignment. In February of 2018 I made a shelf for the squares, which has taken up way too much space. I really liked the grooves in that shelf, but the squares weren’t secure enough. Here’s how the wall looked before I touched it.
I reorganized everything else first and then made a new shelf that was longer so I could add slots in each groove to drop one of each square’s legs down.
Huge improvement and look how much extra space I have for more tools! I need to get myself a nice set of chisels.
Last up was the pegboard on my bench.
I’d been using four of the pegboard holders made for screwdrivers here and don’t care for them; the holes are too big and the spacing is too wide. All you need is scrap plywood with holes drilled in it, which allows you to run two deep and have plenty of expansion room. I also made a holder to store the wood carving set that had been unopened in a box buried on the bench for years.
So much better. Now I can tackle the reorganization of my shop closet.
One thought on “Tool Pegboard Reorganization”
[…] dusting, making a miter saw cart, finishing dust collection hook-ups, updating a grinder stand, reorganizing tool pegboards, and building a Ryobi wall. This post will cover a bunch of random small updates I’ve worked […]