With my big shop table done and a lot of storage space to fill, I finally started to tackle the boxes and piles of things that have been sitting in the corner for nearly a year and a half. First up was towels, rags, cleaning supplies, and first aid. We had an unused plastic shelving unit, so I put it to use. It went between my Ryobi cordless tool wall and the utility sink.

I’ve been draping a hand towel over the edge of the sink since moving in and now I had a place to mount a towel bar. I quickly cut some 2×4 to size, so it would fit between the edges on the side of the top shelf.

Then I drilled four holes in the edge of that shelf and mounted the piece of wood. I drilled two more holes in a piece of PVC and mounted it to the wood.

This was a quick project and it’s extremely useful. I love simple shop builds where functionality is the most important requirement.

If you’re looking for a much nicer towel bar/rack, check out the rustic ones with hooks I made for Brandi’s old house or the combo of black walnut and railroad ties for our old previous house.