Portable Soldering Station

Following up on getting the new hobby desk and organizing the room, I needed something for all of my soldering tools. A lot of the stuff on these shelves needed to be easy to pull out and use at the desk.

The portable soldering station Adam Savage built gave me some inspiration. I could make something to live in the closet when not in use and being portable would allow me to take it to the basement if needed. I measured how much floor space I had available in the closet and hauled everything down to my woodshop.

I cut up some shitty scrap plywood and started playing around with ideas.

Being able to see things in space really helped with my design process. When I had something I was happy with, I made a sketch with rough details.

When I saw it on paper, it reminded me of a wood toolbox with a handle. Makes sense, I guess, since that’s essentially what I was building. I still have a large pile of old oak flooring, so I spent about two hours milling a few pieces down to 3/8″ thick boards. Then I glued some pieces to make panels for the sides, bottom, and shelf.

I picked up a piece of 1″ (it’s actually 1 – 1/8″) oak dowel from Menards for a handle. After letting the glue dry on those panels for a few hours I cut them to size, designed the side profile, and made other pieces. I realized I need to glue up two other panels for the small shelf bottom and a cross piece on the back. I think I only had to recut one small piece that was originally the wrong size. Eventually I had all of the parts.

I sanded all of the faces with 80 grit and then used glue and a pin nailer for assembly. Since nothing here need to support a lot of weight, I went with simple butt joints.

After a quick fit check for all of the tools and supplies, it was obvious I need some way to organize the power cords, so I made a cord wrap from some scraps.

With a palm router I softened the edges everywhere and did a final sanding. Originally I was planning to use a dark stain to match the hobby room’s trim, but after seeing this put together I really liked the lighter colors and the wood grain. I skipped the stain and applied three coats of Minwax Water Based Polycrylic, sanding with a piece of paper bag after each.

I’m really happy with the decision not to use stain. The pieces I selected for the side panels have some great coloring and grain.

All of the tools and materials are easy to access and the station fits well in the closet.