DIY Rack/Band Pegs

Titan Fitness hasn’t had their band pegs in stock for months. This is what they look like.

I got sick of waiting, so I bought a four foot length of 5/8″ steel round rod from Home Depot for $15 and made my own.

  1. Cut the rod down to four 12″ pieces with a cutoff wheel on an angle grinder
  2. Taper an end of each piece and clean up the other end on a belt sander
  3. Drill a hole near the non-tapered end, using a drill press and vise
  4. Insert a nail and cut it so about 1/4″ is left sticking out
  5. Flatten and/or bend the piece of nail so it can’t escape
  6. Soften any remaining sharp edges on the sander
  7. Spray one coat of primer, two coats of black, and two coats of matte clear

They turned out great and I really like how the matte clear finish feels. It’s already getting scuffed up from moving the pegs around a few times though, which I figured would happen. In reality they’re too long and buying a three foot rod would have been better.

So what are these used for? Pegs are the proper way to use bands and things like Crossover Symmetry on a rack/rig. People tend to wrap bands around the J-cups, but that ends up cutting through the bands over time. Nobody like taking a snapped band in the groin! Pegs are round, so they play nice with bands.