This was a very simple build I knocked out one night. I used solid wood scraps for the sides and plywood for the bottom, all 3/4″ thick. It’s about 30″ wide and 18″ deep. The height in the back is about 7″ tall and the front is about 2-1/2″.
Since this was getting painted, the quality of the wood wasn’t a concern and I didn’t need to do much sanding. I used a roundover router bit on all of the edges. I like it when I don’t have to do the finishing work. Turned out nice.
Following up on getting the new hobby desk and organizing the room, I needed something for all of my soldering tools. A lot of the stuff on these shelves needed to be easy to pull out and use at the desk.
The portable soldering station Adam Savage built gave me some inspiration. I could make something to live in the closet when not in use and being portable would allow me to take it to the basement if needed. I measured how much floor space I had available in the closet and hauled everything down to my woodshop.
I cut up some shitty scrap plywood and started playing around with ideas.
Being able to see things in space really helped with my design process. When I had something I was happy with, I made a sketch with rough details.
When I saw it on paper, it reminded me of a wood toolbox with a handle. Makes sense, I guess, since that’s essentially what I was building. I still have a large pile of old oak flooring, so I spent about two hours milling a few pieces down to 3/8″ thick boards. Then I glued some pieces to make panels for the sides, bottom, and shelf.
I picked up a piece of 1″ (it’s actually 1 – 1/8″) oak dowel from Menards for a handle. After letting the glue dry on those panels for a few hours I cut them to size, designed the side profile, and made other pieces. I realized I need to glue up two other panels for the small shelf bottom and a cross piece on the back. I think I only had to recut one small piece that was originally the wrong size. Eventually I had all of the parts.
I sanded all of the faces with 80 grit and then used glue and a pin nailer for assembly. Since nothing here need to support a lot of weight, I went with simple butt joints.
After a quick fit check for all of the tools and supplies, it was obvious I need some way to organize the power cords, so I made a cord wrap from some scraps.
With a palm router I softened the edges everywhere and did a final sanding. Originally I was planning to use a dark stain to match the hobby room’s trim, but after seeing this put together I really liked the lighter colors and the wood grain. I skipped the stain and applied three coats of Minwax Water Based Polycrylic, sanding with a piece of paper bag after each.
I’m really happy with the decision not to use stain. The pieces I selected for the side panels have some great coloring and grain.
All of the tools and materials are easy to access and the station fits well in the closet.
If you have a Bissell carpet cleaner that won’t spray, the heater core might be clogged up. Start removing screws and parts (you can probably find a video on YouTube for your model) until you find a rectangular metal part with wires and hoses connected. For this model it turned out I didn’t need to take the handle pieces apart.
After you remove the wires and hoses, you should be able to pull the heater core out.
Then you can pop off the cover and clean out the inside. I should have taken a picture of the junk that was caked in the channels, but this is what it looked like after I did a quick cleaning.
Then comes the fun part of trying to fit everything back together. 🙂 I had to do it twice because I didn’t route some of the hoses properly. The unit works again though!
Once I found the spark, the rest of the year felt balanced, in terms of not doing too much and varying the types of projects. My favorites were the new home office, the Gympac, and the picnic table / benches. 2021 is off to a great start with several posts already published and others being planned. The hobby room updates will allow me to get back to electronics projects.
When I was doing the wiring for the cabinet LED lighting, I remembered how much I hated the tall desk for that kind of work.
I woke up the next day and decided to get a new desk. I wanted something similar and I basically found the little brother; it’s almost identical. The old one was 4″ deeper, which I think I’ll miss.
When I was desk shopping I saw these storage bins and they sparked ideas for decluttering the area.
I had to make a modification to the desk, because the adjustable shelf couldn’t be placed in the middle. After measuring everything about five times, I made two risers to get the shelf where I wanted. You wouldn’t even notice if I didn’t point them out.
I made a mount to match the profile of my new desk, which hooks up and over the metal bar. This isn’t going anywhere!
Back to those storage bins. My goal was to get the hobby tools out of sight, while making them easy to access. On the bookshelf they were always piled up and I had to get off the chair to reach them. All I needed was some cardboard (from the desk’s box) and hot glue.
The second bin didn’t get dividers because everything in there is pretty big and doesn’t need dedicated space. I can always update it later if necessary. In fact I probably don’t even need the cardboard liner, but it was already made. The small bookshelf, where my tools had been, moved inside the closet. I love the cleaner look the room has.
My brother gave me this reel, which I think he got from an estate sale.
My garage only has an outlet on the wall by the house and one in the ceiling by the garage door opener, so this will come in handy as a quick way to get power anywhere in the garage. There really wasn’t much to restoring it. I cleaned it up, gave it some paint, and put a new grounding cord outlet on it.
I love bringing things like this back to life because we’ve become too quick to discard things. Taking stuff apart also allows me to learn. I’ve often wondered how the wiring worked in a retractable mechanism like this. It’s pretty cool. I bet if I took apart my small wet/dry floor vacuum, the retractable cord in there would be built similar to this. Now I’m curious how retractable air hoses work!
There’s always a risk of breaking something when taking it apart though and that’s exactly what happened to me. The spring snapped when I would it up in the wrong direction. I was able to fix it by cutting the spring, drilling a new hole, and using a nail as a rivet. Hopefully it lasts.
I put everything back together and hung it in the garage.
These are for my hobby room to help organize as well as display things I make or collect. That’s why I went with the half panel half glass doors.
I added some LED tape strip lights I picked up at Home Depot. Two boxes of 16′ lengths left me with several feet left over. There was a fair amount of time spent cutting, stripping, splitting off from the power source, etc. It was good to get back in to some electronics work though.