8x8x8 LED Cube

My last HackerBox, #0030: Lightforms, came with an 8x8x8 LED cube kit. I started building it in May, when I assembled the PCB and made a jig for assembling the grids.

View this post on Instagram

8×8 jig

A post shared by Nick Momrik (@nickmomrik) on

I got busy over the summer and the thought of soldering 512 LEDs didn’t excite me. After catching up on all of my other kits, it was finally time to dive back in.

I thought I took some video of assembling the board, but I must have deleted it. So I didn’t bother with any video while assembling the grids either. The repetition would have been quite boring. I thought I’d do a gallery with captions for a change.

While assembling the 8×8 grids I settled on a pretty good system, so I recorded myself doing a couple of rows to show my method.

This is definitely my longest electronics kit in terms of hours spent and it had so much repetition. Pretty cool result. Here is someone’s demo showing what can be done with the cube.

I’ll need to upgrade the firmware so I can program the board with my own animations.